Brief Introduction

C96SDB40-50C

SMC's cylinder C96SDB40-50C Key ParametersType: Standard round cylinder (compliant with ISO standards, mature structure, highly versatile, suitable for various pneumatic automation applications);Bore Diameter: 40mm (corresponding to "40" in the model; output thrust is approximately 628N at 0.5MPa, suitable for medium-load, short-distance actuation);Stroke: 50mm (corresponding to "50" in the model; short-stroke design for fast response and reduced idle motion time);Built-in Magnetic Ring: None (if position detection is required, select a model with a magnetic ring suffix, such as "C96SDB40-50CM");Port Thread: Rc 1/8 (standard small-flow port, suitable for air supply requirements in medium-load scenarios to ensure stable air supply);Pressure Range: Minimum 0.1MPa, maximum 1.0MPa; pressure resistance 1.5MPa (compatible with conventional pneumatic system pressures, balancing safety and application suitability);Temperature Range: -10~60℃ (stable operation in non-freezing environments; avoid high temperatures to prevent seal aging and reduced airtightness);Piston Speed: 50-500mm/s (a flow control valve is required to prevent end-impact from high-speed movement in short strokes and protect the cylinder and load);Cushioning Method: Air cushioning (marked by "C"; built-in air cushion structures at both ends, no manual adjustment required, enabling smooth deceleration at stroke ends);Mounting Method: "DB" denotes double clevis mounting (standard clevises at both ends of the cylinder body, connectable to equipment brackets via pins, allowing small-angle pivoting for non-rigidly fixed actuation scenarios).ApplicationsSuitable for general linear actuation scenarios with medium load, short stroke, and allowing slight pivoting, particularly suited for applications requiring flexible installation angles, such as:Automated fixture actuation (e.g., clamping of medium-sized workpieces during flipping, auxiliary pushing for tooling opening/closing);Equipment mechanism linkage (e.g., flipping and pushing of materials in production lines, control of small gates);General mechanical movements (e.g., actuation of capping mechanisms in packaging equipment, direction-changing pushing in small conveyor lines);Commonly used as a basic medium-load, short-stroke actuation component in general machinery, auxiliary assembly lines for automotive parts, and medium-sized packaging machinery.